Convert liquid and cubic volume units, including US and imperial measures.
Result
1 L = 0.2641720524 gal (US)
1 L in every supported unit.
| Unit | Value |
|---|---|
| MillilitremL | 1,000 |
| LitreL | 1 |
| Cubic metrem³ | 0.001 |
| US teaspoontsp | 202.8841362111 |
| US tablespoontbsp | 67.6280454037 |
| US cupcup | 4.2267528377 |
| US pintpt (US) | 2.1133764189 |
| US quartqt (US) | 1.0566882094 |
| US gallongal (US) | 0.2641720524 |
| Imperial gallongal (imp) | 0.2199692483 |
| Cubic footft³ | 0.0353146667 |
Complete tool guide
The Volume Converter is a free online conversion tool for translating a volume value from one measurement unit into another. Convert liquid and cubic volume units, including US and imperial measures. Enter a number once to see the selected result and a comparison table covering every supported unit.
Unit conversion is useful whenever a specification, recipe, report, product label, instrument, dataset, or instruction uses a measurement system different from the one you need. The converter applies the defined mathematical relationship consistently and avoids the common mistakes caused by moving decimal points or relying on a remembered approximate factor.
Enter the source number exactly as supplied, including any required decimal precision.
Choose the original unit in the From field and verify its symbol; similarly named units can represent different quantities.
Choose the required destination unit in the To field and read the live result. Use Swap when you need the reverse relationship.
Review the all-conversions table, then copy the labeled result and retain the source value for traceability.
Liquid and cubic values are normalized through litres. The converter distinguishes the US gallon (3.785411784 L) from the imperial gallon (4.54609 L).
Volumes are normalized through litres. US and imperial gallons are listed separately because they are not the same size.
This converter supports Millilitre (mL), Litre (L), Cubic metre (m³), US teaspoon (tsp), US tablespoon (tbsp), US cup (cup), US pint (pt (US)), US quart (qt (US)), US gallon (gal (US)), Imperial gallon (gal (imp)), Cubic foot (ft³).
The output is the same capacity or three-dimensional volume in another supported unit, including litres, millilitres, US kitchen measures, gallons, and cubic units.
US and imperial pints, quarts, and gallons are different. Dry measures can also differ from liquid measures, and ingredient mass cannot be converted to volume without density.
Displayed values are rounded for readability. A converted number cannot be more accurate than the source measurement, so do not treat extra decimal places as additional instrument precision.
Convert liquid and cubic volume units, including US and imperial measures. Supported choices are Millilitre (mL), Litre (L), Cubic metre (m³), US teaspoon (tsp), US tablespoon (tbsp), US cup (cup), US pint (pt (US)), US quart (qt (US)), US gallon (gal (US)), Imperial gallon (gal (imp)), Cubic foot (ft³). Select the unit attached to the source value and the unit required for the result.
The calculator uses the factors and formulas described above and retains precision internally. The practical accuracy still depends on the source measurement, correct unit selection, displayed rounding, and whether the context uses the same unit definition.
Check for a rounded factor, a different regional unit, an incorrect source unit, or a distinction such as decimal versus binary, US versus imperial, gauge versus absolute, or mass versus volume. Compare the complete unit name and method.
Only some metric-prefix conversions work that way. Imperial relationships, offset temperature scales, reciprocal fuel economy, area, volume, and many cross-system conversions require specific formulas. Use the defined converter rather than assuming a power of ten.
Keep working
Continue with another focused tool from the same collection.